- Joined
- Aug 6, 2007
- Messages
- 1,799
- Points
- 3,101
- Age
- 45
- City
- Western Michigan
- Vehicle Year
- 1975-1995 Ford
- Transmission
- Automatic
Big Dumb Mud Truck
Welcome Visitor! Please take a few seconds and Register
for our forum. Even if you don't want to post, you can still 'Like' and react to posts.
Is there any way to do a modification to the joints that they use in front wheel drive cars and use them for a drive shaft, or is those joints not strong enough to use in that way, I figured if GM could use them in the Cadillac with a V8 front wheel drive, why not in a drive shaft on a 4X4 ?!?!
Robert
Is there any way to do a modification to the joints that they use in front wheel drive cars and use them for a drive shaft, or is those joints not strong enough to use in that way, I figured if GM could use them in the Cadillac with a V8 front wheel drive, why not in a drive shaft on a 4X4 ?!?!
Robert
Eb runs now, ign switch had some wires in the wrong spot. I had ign in the run position but when in crank it turned the ign off lol.
Also the trans cooler I picked up for a power steering cooler is a leaker.
Also got started on the traction bar.
I have an apt. weds to get the exhaust bent up for it.