leaf springs

Hello everyone, I'm refreshing the suspension on my 2003 FX4, and while the shocks are totally gone (replacing with Bilstein 4600s), I am unsure about the leaf springs. These look a little flat to me, but the truck does have a tall fiberglass bed cap on and I have hauled a few heavy loads before...

Hi all, as the title says, I recently swapped the frame on my 2006 Ranger with a 2004 sub-frame, and wanted to post my experience, along with any tips that can help out people. I'll try to be as thorough as possible, but may miss minor details. I'll be happy to answer any question that you have...

All started with rear leaf spring replacement on my 1989 Bronco II XL. The old springs were sagged obviously. the shackles were shot, with no hope of removal. when attempting to remove the bolt for the upper shackle mount, the hangers started to twist. Further inspection found almost 50% of the...

Hello. I purchased this kit to replace the bushings in my leaf springs. I was wondering in anyone here has installed this kit or one like it for a 1999 2wd 3.0 V6 Ford Ranger XLT 4 door. I ordered the kit from Amazon, but before I install as I read this kit does not "Completly" match the 99...

I just posted about upgrading the engine in my 2wd 1992 Ranger, 2.3l to make it faster. (here's the thread) But along with making it faster, I want to make the truck a little stiffer to handle corners better, and with less body roll. I've looked into a 4 link rear coilover conversion kit, and...

Hey everyone. I recently picked up a Wildernest topper for my ranger and while I love it does weight more than I thought. I'm considering an add-a leaf kit like this one, https://www.sdtrucksprings.com/add-a-leaf-kits. Anyone have experience with these? Seems pretty simple to install but any...

Have many people used the Deaver G50 spring pack on a near stock application?My original spring pack is getting worn and I'd like to take the opportunity to replace it with a better pack rather than a cheap one. I know the G50 is meant for a good deal of weight but it seems like it might be the...

Howdy ya'll! I have driving Rangers my whole life but have never really worked on beefing them up, just repair and maintenance. Can Some one here help with a little guidance in making my new (to me) 4x4 better off road? The first thing on my list is replacing the rear leaf springs, my bushing...

Hey everybody, i just bought my first vehicle, a 2001 Ranger XLT 4x4 and it is in pretty good condition. What worries me the most is the frame. A majority of it is covered in rust, but not to the point where there are any holes or gouges. Any idea on what I could do to stop the rust and prevent...

I just bought a 1993 Ranger XLT 2WD with 215,000k. I'm told it needs some front end work, and I'm wondering if it would be good to replace or update the coil springs leaf springs while I'm at it. Is there a ready way to see if the springs are still up to spec, and if replacement is warranted, is...

I recently bought a 97 ford ranger xlt 4.0 4x4 ext cab. I noticed the rear leaf springs are more flat than the last trucks i ave owned. is this normal? or is there supposed to be more of an arch in the spring?

I recently got my ranger and it already has a d30 from an xj they have removed all the coil components and installed leafs. the steering is loose (the truck wanders) the tie rod and steering arm look like the Cherokee however the steering shock does not fit its tied on with a hose clamp. maybe...

Just picked up a 97 Ranger 4x4. There is a thump when you hit the throttle. Upon investigation we found that the rear diff actually rolls back when you blip the throttle. We asked around and found this condition is not unheard of with Rangers. We were told that it could be weakened leaf springs...

hopefully some of you can tell me what went wrong...i have a 2000 4wd that the springs were flat...so after reading a bunch i thought explorer leafs would be the best option...i went to my local u-pick and found a set off a 98 4 door with 80000 miles looked like they were in great...