Shumatesoldier6
Member
- Joined
- Dec 5, 2018
- Messages
- 32
- Reaction score
- 0
- Points
- 6
- Location
- Fayetteville, NC
- Vehicle Year
- 1990
- Make / Model
- Ford
- Transmission
- Manual
I have a 90 ranger 2.3 and it has no spark . I have replaced the plugs, wires, fuel pump, fuel pressure regulator, idle air control valve, throttle position sensor, timing belt and tensioner, and the air intake temp sensor. I could get it started but it had a backfire out the exhaust so I pulled the harmonic balancer off and set the timing all of my pulleys were in the correct position and now all of the sudden it will not start and I have no spark. Please help