JohnnyTang
New Member
- Joined
- Sep 13, 2020
- Messages
- 11
- Reaction score
- 3
- Points
- 3
- Age
- 56
- Location
- Renton Wa
- Vehicle Year
- 1987
- Make / Model
- Ford Ranger STX
- Engine Type
- 2.9 V6
- Transmission
- Manual
- 2WD / 4WD
- 4WD
- Total Lift
- 2" factory
- My credo
- If it jams force it, if it breaks it needs replacing anyways.
Hi
I was attempting to do a front brake job on my 87 STX. After pulling the rotors off I discovered the spindles on both sides are trash. I tried to source them locally but no luck. Rockauto only shows the nut and washer. Randy's ring and pinion shows the same parts. This is for a Dana 28. There has to be some place that sells new parts. I don't like the gamble on putting used parts.
I was attempting to do a front brake job on my 87 STX. After pulling the rotors off I discovered the spindles on both sides are trash. I tried to source them locally but no luck. Rockauto only shows the nut and washer. Randy's ring and pinion shows the same parts. This is for a Dana 28. There has to be some place that sells new parts. I don't like the gamble on putting used parts.