HELP FORD RANGER 1994 xlt lift

[Mikeosaji]

I am trying to lift my Ford ranger about 4 inches but I don’t know where to start at all

 

[ericbphoto]

There are a lot of ways to do it. Try reading some if the suspension articles here.

Suspension and Body Lifts - The Ranger Station

DISCLAIMER: Activities and vehicle modifications appearing or described at The Ranger Station and it’s pages may be potentially dangerous. We do not endorse any such activity for others or recommend it to any particular person – we simply describe … Continued

www.therangerstation.com

 

[1990RangerinSK]

Start with a jack.

 

[Shadowrider6661]

Welcome to the club.

 

[MikeG]

Some strong friends

Back is (relatively) easy, swap springs for what you want and longer shocks. Front gets a tad more complicated with twin i-beam (2wd) or twin traction beam (4wd)........ if you want to go 4 inches in the front, now you're talking about replacing springs, radius arms, and likely messing with steering linkage, plus shocks, at a minimum.

 

[gaz]

Mike,

Rough Country 4" for $499 with Free shipping and a $40 off code.

These guys even offer a payment plan

 

[MikeG]

Not bad. Looks like they use drop brackets for the front. Can't see in the image, rear springs or just lift blocks?

Looks like a dropped pitman arm for the steering so check that off the list.......

 

[Jim Oaks]

I don't like the Rough Country Ford Ranger kits because they use an extension plate instead of a drop bracket.

I would strongly suggest a Skyjacker kit with shocks.

skyjacker ford ranger lift | 4wheelparts.com

 

[SenorNoob]

My recommendation for a '94 would be 3" body lift, Belltech shackles, and 1/2" - 3/4" spacers under the coil springs. Unless you have a reason to do a suspension lift.

 

[JMF661]

To do it “right” without any major custom fabrication work, the skyjacker kit worked pretty well for me. The 4/6 inch kit with leafs, shocks, and new radius arms will cost about 3000 dollars.

I’ve heard the duff kits are great as well.

I feel like I got my money’s worth.

 

[JMF661]

Mine is a 94’. I would go ahead and recommend getting the six inch kit. I’m already looking to replace my four inch coil springs with six inch coil springs.