dukeman2251
New Member
- Joined
- Feb 20, 2012
- Messages
- 9
- Reaction score
- 0
- Points
- 0
- Location
- Ravensdale WA
- Vehicle Year
- 1991
- Make / Model
- Ford
- Engine Size
- 2.3
- Transmission
- Manual
hi im new and didnt know where to post this so here we go:
im running a 93 2.3L 8 plug engine and read on a website called hotrodhigh.ca that flipping the plug wires on the intake side (1 with 4, and 2 with 3) will change the intake side from firing when the exhaust is open to the compression stoke at the same time as the primary side plugs. Any ideas of this or if someone has done it in the past?
im running a 93 2.3L 8 plug engine and read on a website called hotrodhigh.ca that flipping the plug wires on the intake side (1 with 4, and 2 with 3) will change the intake side from firing when the exhaust is open to the compression stoke at the same time as the primary side plugs. Any ideas of this or if someone has done it in the past?