alnvilma
New Member
- Joined
- Sep 9, 2007
- Messages
- 34
- Reaction score
- 0
- Points
- 0
- Age
- 76
- Vehicle Year
- 1993
- Make / Model
- Ford
- Transmission
- Manual
YOUR ideas to install my 5spd worked!
I have read the threads and posts:
My M50D gets 3/4" or so from bolting up. I've bled the pressure off the slave,
turned the output shaft till I feel the splines mesh, cleared the gap of any cables/lines, spent hours lifting/twisting/pushing. Nothing.
People at NAPA have suggested "do not pull it back out now!"
Any other suggestions sure would be appreciated cuz I'm afraid if I use the 'longer bolt method' I may squash my new pilot bearing.
I did everything by the book; all new, lubed,straight, etc.
I have read the threads and posts:
My M50D gets 3/4" or so from bolting up. I've bled the pressure off the slave,
turned the output shaft till I feel the splines mesh, cleared the gap of any cables/lines, spent hours lifting/twisting/pushing. Nothing.
People at NAPA have suggested "do not pull it back out now!"
Any other suggestions sure would be appreciated cuz I'm afraid if I use the 'longer bolt method' I may squash my new pilot bearing.
I did everything by the book; all new, lubed,straight, etc.
Last edited: