- Joined
- Sep 4, 2022
- Messages
- 37
- Reaction score
- 27
- Points
- 18
- Location
- Independence Missouri
- Vehicle Year
- 1998
- Make / Model
- Ford Ranger XLT
- Transmission
- Manual
I have a 99 ranger supercab with a 306 and 5 speed and an explorer rear end.
I. Have been searching for leaf spring pads and shock mounts to weld onto the expo diff to correct the pinion angle problem I have with the rear end. I found some spring perches that are the correct size but I am having a problem finding some oem style shock mounts for the 3.25” axle tubes. Does anyone have a source for these?
I’m also having trouble finding the leaf spring mount plates that are for the 3.25” tubes and 2.5” leaf springs. I’ve been looking at F150 plates since they have the correct dimensions as far as I can tell.
would like to hear what everyone else is using for this.
I. Have been searching for leaf spring pads and shock mounts to weld onto the expo diff to correct the pinion angle problem I have with the rear end. I found some spring perches that are the correct size but I am having a problem finding some oem style shock mounts for the 3.25” axle tubes. Does anyone have a source for these?
I’m also having trouble finding the leaf spring mount plates that are for the 3.25” tubes and 2.5” leaf springs. I’ve been looking at F150 plates since they have the correct dimensions as far as I can tell.
would like to hear what everyone else is using for this.