mattneedstires
New Member
- Joined
- Mar 28, 2024
- Messages
- 1
- Reaction score
- 0
- Points
- 1
- Location
- Socal
- Vehicle Year
- 97
- Make / Model
- ranger
- Transmission
- Manual
I have a ibeam rwd ranger. I just want to be able to take it off small jumps then never touch the build list again. LMK what this list is missing.
-Front frame plates (100 ish and 4 hours)
-2 point cage with door bars tied to a bed cage (400 ish and 30 hours)
-Polly bumps and limit straps (130 ish and 3 hours)
-Foa shocks 10inch front/14nch rear (600 plus 3 hours for hoops)
-10 inch extended radius arms up front using chopped stock arms with 1.25 x .25 tube (60 and 3 hours)
-Chevy 64 inch leaf swap (100 and 4 hours)
-Extended brake lines (100 and 1 hour)
so 1.5k and 50 hours for a extra few inches of travel, better dampening, and a body thats not gonna banana, does this check out
-Front frame plates (100 ish and 4 hours)
-2 point cage with door bars tied to a bed cage (400 ish and 30 hours)
-Polly bumps and limit straps (130 ish and 3 hours)
-Foa shocks 10inch front/14nch rear (600 plus 3 hours for hoops)
-10 inch extended radius arms up front using chopped stock arms with 1.25 x .25 tube (60 and 3 hours)
-Chevy 64 inch leaf swap (100 and 4 hours)
-Extended brake lines (100 and 1 hour)
so 1.5k and 50 hours for a extra few inches of travel, better dampening, and a body thats not gonna banana, does this check out