Welcome Visitor! Please take a few seconds and 
Stitter
New Member
- Joined
- Oct 14, 2020
- Messages
- 2
- Reaction score
- 0
- Points
- 1
- Location
- UTAH
- Vehicle Year
- 1994
- Make / Model
- Ford Ranger Spl
- Transmission
- Manual
Hi Everyone,
I believe this is my first post. But I have been lurking for almost 2 years.
I have read mixed answers on this so I thought it was time I ask.
If I were to mill the head to bump compression to 10:1 and put a slightly larger cam in the head can the stock computer handle those changes?
This will be going in a 94 ranger so I do have a MAF sensor not speed density.
Would love input from those more knowledgeable than myself (probably most of you) or those that have done this before.
I believe this is my first post. But I have been lurking for almost 2 years.
I have read mixed answers on this so I thought it was time I ask.
If I were to mill the head to bump compression to 10:1 and put a slightly larger cam in the head can the stock computer handle those changes?
This will be going in a 94 ranger so I do have a MAF sensor not speed density.
Would love input from those more knowledgeable than myself (probably most of you) or those that have done this before.
