RegularGuy
Active Member
- Joined
- Apr 20, 2020
- Messages
- 129
- Reaction score
- 38
- Points
- 28
- Location
- Belingham, WA
- Vehicle Year
- 2007
- Make / Model
- Ford Ranger
- Engine Type
- 4.0 V6
- Transmission
- Automatic
- 2WD / 4WD
- 4WD
The question; if adjustments need to be made do I need replacement hardware? I
I've seen hardware available ranging from 1.5° to 2.0°. Would a 1.5° give me either +/- 1.5° or is it a range where I could for example get 1.0°?
The background; the truck is a 2007 4.0 4x4.
I've received a few opinions from different shops in my area and none of them can agree on whether the ball joints need to be replaced. There is a slight movement in the upper bushings indicating to me the upper control arm needs replacement
I've seen hardware available ranging from 1.5° to 2.0°. Would a 1.5° give me either +/- 1.5° or is it a range where I could for example get 1.0°?
The background; the truck is a 2007 4.0 4x4.
I've received a few opinions from different shops in my area and none of them can agree on whether the ball joints need to be replaced. There is a slight movement in the upper bushings indicating to me the upper control arm needs replacement