3/4 Drop Kit for 2009 Ranger Question

[Waterfall99]

Hey guys, new to the forums here, ive searched anywhere and haven't found any information on lowering a newer Ranger 3" in the front. Reason being is I want to do a 3/4 drop and no kits are currently available with that drop for years 98+ rangers.

I have seen 3" lowering coils out there from Belltech and I am wondering if I can use those without buying new upper and lower control arms.

Are there camberbolts that will compensate for 3" drop coils in the front?

Here is the link to the drop coils:

http://www.andysautosport.com/products/belltech__4797.html

Thanks!

 

[ES894x4]

Yes you will have to piece together a kit if you dont want 2/3 or 4/5. It isnt hard to piece your own kit together, if 3/4 is what you like i say go for it! The 2-1/4* camber eccentrics like napa sells maxed out the adjustable range on mine, with a 2.5" drop spring(didnt want 3" didnt want 2" so i cut drop springs where i liked after breaking them in for 2 months). Im at 1.25* negative camber which i like, with 3" springs it would obviously be a little more. Also pieced together my rear drop instead of buying djms 3" kit. Used the djm 5" flip kit, and a djm chevy 2" drop shackle for an 88-98. The shackle measures 6.5" and 7.5" eye to eye depending on which hole you use(stock shackle for 98+ is 5.5"). Id also recommend buying from summit as they sell belltech and djm products and are fast, reliable, with free shipping over $100. andysautosport is a joke.

How i dropped the rear.
http://www.summitracing.com/parts/djm-sh1011-2/
http://www.summitracing.com/parts/djm-fk3098-5/