- Joined
- Oct 5, 2007
- Messages
- 5,419
- Reaction score
- 3,007
- Points
- 113
- Location
- Toledo Ohio
- Vehicle Year
- 20002005199
- Make / Model
- Fords
- Engine Size
- 3.0 2.3
OK, from the 2005 factory manual, page 303-14-4
"rotate the crankshaft until the No.1 cylinder is at TDC of the compression stroke and the TDC mark lines up with the timing mark"
set it at the pyramid and see if the screwdriver hits the piston top.
"rotate the crankshaft until the No.1 cylinder is at TDC of the compression stroke and the TDC mark lines up with the timing mark"
set it at the pyramid and see if the screwdriver hits the piston top.