Evan
New Member
- Joined
- Aug 11, 2007
- Messages
- 1,373
- Reaction score
- 5
- Points
- 0
- Location
- Stevens Point, WI
- Vehicle Year
- 1991
- Make / Model
- Ford
- Engine Size
- 4.0 OHV
- Transmission
- Manual
I have been focusing most of my attention during the past 8 months on the new job, but after settling in a bit I figure it's time to start working on the Explorer again. For a while I was unsure of the route I wanted to take, but I've finally decided.
Ford 8.8 rear with discs, 5.13s, No-Slip locker
Double cardian rear shaft
New rear bumper
5.13s front with lunchbox locker
Double core radiator, performance e-fan with auto thermostat
Front winch
Jeep hubs
35x12.5s on steel wheels
New clutch, starter, flywheel
I'll be documenting progress and providing pics as I go along.
Got a D35 front today with 5.13s set up and a locker. The 5.13s will bring my final crawl up to 117.
I'll be setting up the 8.8 gears myself. It'll be my first time setting up gears and I'll try to document it from a newb perspective.
Ford 8.8 rear with discs, 5.13s, No-Slip locker
Double cardian rear shaft
New rear bumper
5.13s front with lunchbox locker
Double core radiator, performance e-fan with auto thermostat
Front winch
Jeep hubs
35x12.5s on steel wheels
New clutch, starter, flywheel
I'll be documenting progress and providing pics as I go along.
Got a D35 front today with 5.13s set up and a locker. The 5.13s will bring my final crawl up to 117.
I'll be setting up the 8.8 gears myself. It'll be my first time setting up gears and I'll try to document it from a newb perspective.
Last edited: