du510
New Member
- Joined
- Aug 21, 2007
- Messages
- 332
- Reaction score
- 0
- Points
- 0
- Location
- Stuck between NYC & Boston
- Vehicle Year
- 1994
- Make / Model
- MAZDA
- Transmission
- Manual
Anyone know who makes them, or where I can get a pair? Like this:
Welcome Visitor! Please take a few seconds and Register for our forum. Even if you don't want to post, you can still 'Like' and react to posts.
I had those as a temporary solution, but one popped out while wheeling. I still have them, but I welded a piece of 1/4" steel about 1.5 long to the top of the coil bucket and haven't had any issues. Took about 5 min to cut it and weld it up.Not sure where to get those, but I used a hose clamp around the coil and the bucket and it works just fine. Just a thought.
Wanna make me a pair?I make my own. Haven't had a spring pop out yet. I go to my local steel supply And pick up scraps from the saw. I haven't been charged for one yet. Of course I have a little time, oxy/acetylene, and electricity in each.
i think i paid 10 bucks for both, i figured hey, its 10 bucks what the hell.
I had a hose clamp doing that job, and that turned in to a terrible and almost dangerous drive home one night.Not sure where to get those, but I used a hose clamp around the coil and the bucket and it works just fine. Just a thought.