Ranger5.0
New Member
- Joined
- Sep 30, 2007
- Messages
- 602
- Reaction score
- 0
- Points
- 0
- Age
- 42
- Location
- Lindsay Ontario
- Vehicle Year
- 1993
- Make / Model
- Ford
- Transmission
- Automatic
Ok, so Ive been working on my truck for a a while now. Some electrical work and body work. After folin around with the engine harness I cant get it to fire up. I pulled code, I get a 67 which is nothing to worry about at the moment. and code 11, which is good. I have spark @ the coil and fuel presure @ the test port on the rail. Im guessing the injectors arnt opening? Where should i look next? I need a noid light to see if the injectors are getting a signal from the ecm right?