Welcome Visitor! Please take a few seconds and ashleyroachclip
New Member
- Joined
- Oct 22, 2007
- Messages
- 178
- Reaction score
- 1
- Points
- 0
- Vehicle Year
- 1994 Ranger STX
- Make / Model
- 1995 Explorer L
- Transmission
- Manual
Well I bought a 3004 Explorer, that is generally in very nice condition.
Problem is , which I knew going into it , is the engine is toast.
Both the ranger and explorer have a sohc 4.0.
My 04 in particular , has the drive by wire .
I am aware that the bellowing patterned are the same , heads are the same .
My question , because there are more sohc rangers in the wrecking yard than exporters, can I swap the intakes , and misc. Sensors , to make this swap .
This is a flipper , but might keep it for the wife.
So I do want to get this done as efficiently and least expensively as I can.
No hacking of wiring harnesses, cobbled accessory brackets etc.
Thanks guys and gals.
Problem is , which I knew going into it , is the engine is toast.
Both the ranger and explorer have a sohc 4.0.
My 04 in particular , has the drive by wire .
I am aware that the bellowing patterned are the same , heads are the same .
My question , because there are more sohc rangers in the wrecking yard than exporters, can I swap the intakes , and misc. Sensors , to make this swap .
This is a flipper , but might keep it for the wife.
So I do want to get this done as efficiently and least expensively as I can.
No hacking of wiring harnesses, cobbled accessory brackets etc.
Thanks guys and gals.
