Welcome Visitor! Please take a few seconds and bcammons
New Member
- Joined
- Oct 28, 2011
- Messages
- 28
- Reaction score
- 0
- Points
- 0
- Location
- Durham, NC
- Vehicle Year
- 1994
- Make / Model
- Ford
- Engine Size
- 4.0
- Transmission
- Manual
So I changed the bed on my 94 ranger 4.0. The bed is from a later model ranger and I have gone from a 6 light set up (1 red, 1 clear and 1 yellow on each side) to a 4 light set up of the newer style lights (1 red and 1 reverse on each side).
I have spent forever and a day trying to figure out how to get the turn signals to work with this set up. I have tried a relay and nothing (I am assuming the voltage drop across the relay is too much to power the turn lights). I have test all the wires from the chassis harness to the bed harness. The number of wires matches up just no turn signals what so ever. I use the truck for work and that was the reason for the bed swap.
Thanks
Brandon
I have spent forever and a day trying to figure out how to get the turn signals to work with this set up. I have tried a relay and nothing (I am assuming the voltage drop across the relay is too much to power the turn lights). I have test all the wires from the chassis harness to the bed harness. The number of wires matches up just no turn signals what so ever. I use the truck for work and that was the reason for the bed swap.
Thanks
Brandon
