TallCanadian
New Member
- Joined
- Oct 6, 2013
- Messages
- 25
- Reaction score
- 0
- Points
- 0
- Location
- Dartmouth, Nova Scotia, Canada
- Vehicle Year
- 2011
- Make / Model
- Ford
- Engine Size
- 4.0 Liter
- Transmission
- Automatic
So it’s been a couple of weeks since I’ve worked on my truck. Mostly due to frustration, but work keeps me busy. I replaced both calipers and now the brakes are no longer locking up and causing traction control issues. My new challenge is the anti lock brake working when I press the brake pedal. I have no abs light on. But I get that pulsating pedal and that grinding sound. I’ve been doing some research and watching videos, etc. This is what I have done. Check abs fuse. Fuse is okay. Unplugged both sensors and checked ohms and voltage on both sensors by spinning the wheels. I get nothing on either sensor. I’ve taken the brakes, rotors all off again and cleaned sensors. I’m really at a loss here and need your help. Could both sensors have gone bad since I replaced all the brake parts? It doesn’t make sense. And yes, both rotors have the rings in them. And I checked the part numbers to make sure I received the right rotors.