rangerbronco288
New Member
- Joined
- Dec 9, 2007
- Messages
- 73
- Reaction score
- 0
- Points
- 0
- Age
- 34
- Location
- Westland Michigan
- Vehicle Year
- 1995
- Make / Model
- Ford
- Engine Size
- 4.0
- Transmission
- Manual
Ok first let me explain what is going on i have a solid 2.9 motor from an 89 ranger a good fm145 from an 87 ranger an ecc and wiring harness from an 87 and my truck is a 88 ranger stx. I just put the motor ecc and wiring harness in and for the most part everything is good, but on the drivers side of the vehicle lies my problem. Theres about 3 or 4 plugs that are different sooo, I need an accurate wiring diagram for a 1987 ford ranger 2.9L.
I also need a diagram for a 1988 ranger so i can figure out what i have to cut and splice in the old connectors from my original wiring harness.
And being that it is summer im not currently in school or else i would just print it off of alldata but any help is greatly appreciated.
Thanks,
Jeff
I also need a diagram for a 1988 ranger so i can figure out what i have to cut and splice in the old connectors from my original wiring harness.
And being that it is summer im not currently in school or else i would just print it off of alldata but any help is greatly appreciated.
Thanks,
Jeff