arcwelder
New Member
- Joined
- Oct 21, 2017
- Messages
- 15
- Reaction score
- 0
- Points
- 1
- Vehicle Year
- 2002
- Make / Model
- Ford
- Transmission
- Automatic
Hey Guys,
I need to replace the lower radiator hose on my 2002 Ranger Edge 3.0, and was hoping to get some advice/input on the easiest way to remove and install the smaller branch of the lower radiator hose that goes to the front of the engine (to the water pump(?)), since that area is really tight. Do I have to remove the air intake, serpentine belt, and radiator fan (and maybe more)? Or is it possible to do the job by just removing the serpentine belt, or maybe even by not removing it at all?
Any advice/input is much appreciated. Thanks in advance for your help.
I need to replace the lower radiator hose on my 2002 Ranger Edge 3.0, and was hoping to get some advice/input on the easiest way to remove and install the smaller branch of the lower radiator hose that goes to the front of the engine (to the water pump(?)), since that area is really tight. Do I have to remove the air intake, serpentine belt, and radiator fan (and maybe more)? Or is it possible to do the job by just removing the serpentine belt, or maybe even by not removing it at all?
Any advice/input is much appreciated. Thanks in advance for your help.