- Joined
- Nov 21, 2009
- Messages
- 206
- Reaction score
- 1
- Points
- 0
- Location
- Newport, Maine
- Vehicle Year
- 1991
- Make / Model
- Ford
- Engine Size
- 2.3
- Transmission
- Manual
So ive got power and ground done on my battery relocation now, and have my ranger rolling over too. So in the nest of wires I have which is the stock 91 2.3 harness with it repinned for the 86 merkur engine and computer, I'm lost a bit. I don't have what appears to be a plug to run the injectors that fits the merkur engine, and since my engine was a 8 plug head with two coil packs, which plug do I use with my distributor, the black or gray one? The injector harness is a 4 larger pin female socket, but nothing that matches the stock ranger harness. Any ideas???? Thanks guys!