Zero_Cool
New Member
- Joined
- Jul 25, 2013
- Messages
- 47
- Reaction score
- 0
- Points
- 0
- Vehicle Year
- 1987
- Make / Model
- Ford
- Engine Size
- 4.0L
- Transmission
- Manual
Just recently got the motor rebuilt, and everything is hooked up but when I go to turn it over I am getting nothing on the key turn to start.
I have checked all the grounds, they are good, starter checked it works, I tested the clutch sensor plug there is no voltage going to the plug, and the fuel pump is not priming unless I force the relay to activate the pump, I have checked all the fuses and everything looks good. So basically I am stumped at this point
I have checked all the grounds, they are good, starter checked it works, I tested the clutch sensor plug there is no voltage going to the plug, and the fuel pump is not priming unless I force the relay to activate the pump, I have checked all the fuses and everything looks good. So basically I am stumped at this point
Last edited: