Welcome Visitor! Please take a few seconds and Register
for our forum. Even if you don't want to post, you can still 'Like' and react to posts.
definitly not the radius arms. it literally sits or is connected to the i beams
I don't think those are covers, rather they are custom made I beams. most likely extended and purpose built. Do a search on here others have done it.
Yaa that could be what he is referring too, but def the I-beams or Steering Linkages not much else there to be honest.
^^^this.
X2 it's called single swing steering...used on unequal length beams mostly. And dual swing steer used on equal length long travel... by doing the steering this way and running the tie rods the same length and bend as the extended beams and by having the tie rods pivot at the same plane as the beam pivots it means the steering will not push the tires out or pull them in as the suspension cycles up and down..
For a small yearly donation, you can support this forum and receive a 'Supporting Member' banner, or become a 'Supporting Vendor' and promote your products here. Click the banner to find out how.
