Welcome Visitor! Please take a few seconds and 
OMFG nick
New Member
- Joined
- Dec 13, 2008
- Messages
- 101
- Reaction score
- 0
- Points
- 0
- Location
- wylie, tx
- Vehicle Year
- 2004
- Make / Model
- ford
- Engine Size
- rockin' the 3.0
- Transmission
- Automatic
decided i was going to go ahead and start doing my door and dash paint mod.
was thinking since the paint on the plastic door panel pieces was already chipping off, that i needed to do something a little different. I went out and bought primer, a can of truck/van duplicolor ford shadow metallic grey color match paint, and a duplicolor clear coat (all purchased at my local autozone)
so i dissasembled the door pieces (the part with the handle) sanded it down really good. started at a 60 and worked my way up to a 1500 grit. primered it. then repeated the sanding process. after that was done. i layed a few coats of the shadow grey duplicolor. and let sit for an hour or so. after that i layed it on a second time. after that dried. i went ahead and clear top coated it.
i took pictures along the way of the whole process. I left my camera in the truck so i cant upload them and will have to wait until tomorrow. Has anyone else performed this procedure? any pictures of how it turned out?
was thinking since the paint on the plastic door panel pieces was already chipping off, that i needed to do something a little different. I went out and bought primer, a can of truck/van duplicolor ford shadow metallic grey color match paint, and a duplicolor clear coat (all purchased at my local autozone)
so i dissasembled the door pieces (the part with the handle) sanded it down really good. started at a 60 and worked my way up to a 1500 grit. primered it. then repeated the sanding process. after that was done. i layed a few coats of the shadow grey duplicolor. and let sit for an hour or so. after that i layed it on a second time. after that dried. i went ahead and clear top coated it.
i took pictures along the way of the whole process. I left my camera in the truck so i cant upload them and will have to wait until tomorrow. Has anyone else performed this procedure? any pictures of how it turned out?
