Welcome Visitor! Please take a few seconds and dmgksg
New Member
- Joined
- Mar 7, 2009
- Messages
- 18
- Reaction score
- 0
- Points
- 0
- Vehicle Year
- 2004
- Make / Model
- Ford
- Engine Size
- 3.0
- Transmission
- Manual
04 Edge Throwing Misfire Codes
I've replaced plugs, plug wires, fuel filter, and coil pack. I've also tested the maf sensor, idle air control valve and fuel pump. All are working correctly. I've also checked for vacuum leaks around the intake manifold and the vacuum lines and found nothing. I'm still getting rough idle after vehicle is warm and getting PO300, 306 and 316 codes. Any ideas would be greatly appreciated.
I've replaced plugs, plug wires, fuel filter, and coil pack. I've also tested the maf sensor, idle air control valve and fuel pump. All are working correctly. I've also checked for vacuum leaks around the intake manifold and the vacuum lines and found nothing. I'm still getting rough idle after vehicle is warm and getting PO300, 306 and 316 codes. Any ideas would be greatly appreciated.
Last edited:
