Welcome Visitor! Please take a few seconds and 
swynx
Active Member
- Joined
- Mar 26, 2008
- Messages
- 2,401
- Reaction score
- 9
- Points
- 38
- Age
- 31
- Location
- lewiston idaho
- Vehicle Year
- 1994
- Make / Model
- Mazda
- Engine Size
- 4.0
- Transmission
- Manual
buddy has a 93 ranger with what he claims is a six inch lift, he barely clears my 33's with it with no fender trimming. i clear the same 33's with a 2 inch body lift. the lift bracket has been broken and re-welded like 3 times, but they never put any reinforcements or gussets on it.
the springs are pretty soft, when going over kelly humps in 1st and 4 low he can compress the spring all the way to the bump stops.
ive read the article on fixing the broken brackets, but i dont think i want 6 inchs of lift, maybe 4 inchs. could a drill a new hole in the brackets for a 4 inch lift?
im really only asking because he only wants 200$ for the whole kit with beams and pumpkin.
the shocks say skyjacker and the coils are red but i dont think the lift is skyjacker
the springs are pretty soft, when going over kelly humps in 1st and 4 low he can compress the spring all the way to the bump stops.
ive read the article on fixing the broken brackets, but i dont think i want 6 inchs of lift, maybe 4 inchs. could a drill a new hole in the brackets for a 4 inch lift?
im really only asking because he only wants 200$ for the whole kit with beams and pumpkin.
the shocks say skyjacker and the coils are red but i dont think the lift is skyjacker
