RangerJoey
Member
- Joined
- Apr 29, 2017
- Messages
- 96
- Reaction score
- 7
- Points
- 8
- Location
- BMore
- Vehicle Year
- 1999
- Make / Model
- Ford
- Engine Size
- 4.0L V6
- Transmission
- Automatic
- My credo
- Teen Wolf for President!
Hi All,
I'm in the middle of doing a full overhaul on a 1999 4.0 XLT and am going to do the brakes next. I've never done anything other than a disc system so I'm looking for some advice/tips and also making sure I'm getting all the right parts.
This truck has the 10" rear brake shoes and 11.25" front rotors. For the front, I'm just going with:
For the back, and this is what is throwing me off, I'm doing with:
I have some anti-squeal and tons of brakeleen. Is there anything else I might be missing or should address when doing this? I need to flush the brake fluid so I'm set on that front too.
TIA!
I'm in the middle of doing a full overhaul on a 1999 4.0 XLT and am going to do the brakes next. I've never done anything other than a disc system so I'm looking for some advice/tips and also making sure I'm getting all the right parts.
This truck has the 10" rear brake shoes and 11.25" front rotors. For the front, I'm just going with:
- Akebono ACT652 ProACT Ultra-Premium Ceramic Brake Pad Set
- Raybestos 66576R Professional Grade Disc Brake Rotor x 2
For the back, and this is what is throwing me off, I'm doing with:
- Raybestos 705PG Professional Grade Drum Brake Shoe Set
- ACDelco 18B259 Professional Rear Brake Drum Assembly x 2
- Carlson H2335 Rear Drum Brake Hardware Kit
- ACDelco 18E1135 Professional Rear Drum Brake Wheel Cylinder Assembly x 2
I have some anti-squeal and tons of brakeleen. Is there anything else I might be missing or should address when doing this? I need to flush the brake fluid so I'm set on that front too.
TIA!