- Joined
- Aug 6, 2007
- Messages
- 626
- Reaction score
- 5
- Points
- 18
- Age
- 50
- Location
- Manton,MI
- Vehicle Year
- 1993
- Make / Model
- Ford
- Engine Size
- 4.0L
- Transmission
- Manual
My BroncoII is too small for my whole family to go wheeling with so I decided that the BroncoII would become my "off road park rig" and that I would build a rig for the 7 of us to do the light wheeling in. So I bought a 93 2wd aerostar to build along with a 4wd aerostar and 4wd Ranger for parts. I plan is to use the stock 4.0L along with a Ranger tranny and a 1350 Doubler tcase. It will get a D44HP front axle with the steering from the donor truck and a FW8.8 in the rear. Here are some pic's of the project so far.
This is what it looked like bringing her home.
I riped all the stock suspension out and put leafs in the rear.
Picks of the rear suspension installed using an F150 8.8.
I have a TK4, FM145, and a C5 to choose from for a tranny so I'm starting with the TK4. I know they are week but nothing is permanent.
These pic's give you a good idea of what she will look like when finished.
I still need to fix the problem of the door hitting the rear wheel, I need to lengthen the line going from the clutch master to slave. I need to build the doubler (next project) and need to get my front axle as the first one was stolen. I will post pic's as it gets done. I hope to finish it by spring. RB
This is what it looked like bringing her home.
I riped all the stock suspension out and put leafs in the rear.
Picks of the rear suspension installed using an F150 8.8.
I have a TK4, FM145, and a C5 to choose from for a tranny so I'm starting with the TK4. I know they are week but nothing is permanent.
These pic's give you a good idea of what she will look like when finished.
I still need to fix the problem of the door hitting the rear wheel, I need to lengthen the line going from the clutch master to slave. I need to build the doubler (next project) and need to get my front axle as the first one was stolen. I will post pic's as it gets done. I hope to finish it by spring. RB