- Joined
- Aug 6, 2007
- Messages
- 527
- Reaction score
- 0
- Points
- 0
- Age
- 36
- Location
- Caledonia, Ontario
- Vehicle Year
- 1990
- Make / Model
- Ford
- Engine Size
- 5.0L
- Transmission
- Automatic
Hello everyone.
Ive got a question about the pinion angle and castor angle. Basically I want to know what i should set the pinion angle at. Also I want to know if the angle i set the pinion to will effect if i should adjust the castor angle since ive already got one of the inner "C"s off, and im able to adjust it. Wouldn't be a huge deal to take the other off to adjust it if it would be recomended to change the angle.
I'm going for about 6 - 8 inches of lift when i install the axle.
The axle is out of a 77 f-150, narrowed 6inches and im going to make a custom setup for the radius arms to be the same as the 2008 F-250 instead of re-using the 77 style radius arms with the wedges welded to the axle.
Ive got a question about the pinion angle and castor angle. Basically I want to know what i should set the pinion angle at. Also I want to know if the angle i set the pinion to will effect if i should adjust the castor angle since ive already got one of the inner "C"s off, and im able to adjust it. Wouldn't be a huge deal to take the other off to adjust it if it would be recomended to change the angle.
I'm going for about 6 - 8 inches of lift when i install the axle.
The axle is out of a 77 f-150, narrowed 6inches and im going to make a custom setup for the radius arms to be the same as the 2008 F-250 instead of re-using the 77 style radius arms with the wedges welded to the axle.