Avyn Nix
New Member
- Joined
- Jul 16, 2023
- Messages
- 28
- Reaction score
- 11
- Points
- 3
- Location
- California
- Vehicle Year
- 2004
- Make / Model
- Ford Ranger XLT
- Engine Type
- 4.0 V6
- Transmission
- Manual
- 2WD / 4WD
- 4WD
- Total Lift
- Stock.
- Tire Size
- 30in
Just got my alignment done on my 2004 4x4 ranger after I installed the upper an arm adjustment cams and the numbers are different from the left and right sides. The upper arm is not parallel to the lower on both sides either the front mount is about 3/4 of an inch inward compared to the rear mount. The steering doesn’t feel as tight as it did before installing the adjustment cams and it has the fall on its face feel in corners compared to before.
left side
-0.2 camber
3.2 caster
0.04 toe
right side
-0.4 camber
3.5 caster
0.05 toe
Hope you guys can tell me if this looks right, all help is appreciated.
left side
-0.2 camber
3.2 caster
0.04 toe
right side
-0.4 camber
3.5 caster
0.05 toe
Hope you guys can tell me if this looks right, all help is appreciated.