Welcome Visitor! Please take a few seconds and Driver_WT
New Member
- Joined
- Jun 5, 2022
- Messages
- 15
- Reaction score
- 0
- Points
- 1
- Location
- Nova Scotia, Canada
- Vehicle Year
- 2007
- Make / Model
- Ford Ranger
- Transmission
- Manual
I have a 2007 Ranger 2.3 DOHC in a project vehicle with the 2007 Ranger 5 speed manual trans. Has anyone put cams in their 2.3 DOHC Duratec? Any real life experience and actual results?
I have looked at cams from Fab9, Esslinger Engineering, Brian Crower. They are a little pricy - around $600 for the pair plus most say if you install their stage 2 cams and plan to rev the engine into the 7000+ range to also install their valve springs for another $340 to $425. So, more than $1000 for upgraded cams.
Thanks.
I have looked at cams from Fab9, Esslinger Engineering, Brian Crower. They are a little pricy - around $600 for the pair plus most say if you install their stage 2 cams and plan to rev the engine into the 7000+ range to also install their valve springs for another $340 to $425. So, more than $1000 for upgraded cams.
Thanks.
