TigerTownRanger
New Member
- Joined
- Mar 23, 2015
- Messages
- 5
- Reaction score
- 0
- Points
- 0
- Vehicle Year
- 2000
- Make / Model
- Ford
- Transmission
- Manual
Hey guys,
I'm looking to swap out my finnicky electronic transfer case with a manual one.
I've been doing some lurking and googling. I think I understand what needs to be done but I need some specifics.
I have a 2000 3.0 XLT with the electronic 4x4 and Rugged Ridge manual locking hubs. Problem is, the electronic 4x4 is really unreliable. Sometimes it works, sometimes it doesnt, and recently I sometimes hear this strange grinding noise when 4x4 is engaged, it almost sounds like clutch chatter but a lot quieter and more "metallic" sounding from the firewall area.
Instead of paying out a small fortune to throw parts at it or take it to a shop, I just want to swap to a more reliable manual t-case.
From what I've read, this is what I need to do the swap:
A 1354 or 1350 manual transfer case.
The front drive shaft from a 91 Explorer.
Supposedly all the parts are straight bolt on.
Anyone have any experience with this? Is it really this straightforward? Will I need a new front Diff, axle shafts, and hubs as well? Also, any tips on installing the new shifter in the truck cabin? I'm assuming its going to require some cutting into my truck's floor to install it.
Any tips would be really helpful, I'm hoping to do this really soon.
I'm looking to swap out my finnicky electronic transfer case with a manual one.
I've been doing some lurking and googling. I think I understand what needs to be done but I need some specifics.
I have a 2000 3.0 XLT with the electronic 4x4 and Rugged Ridge manual locking hubs. Problem is, the electronic 4x4 is really unreliable. Sometimes it works, sometimes it doesnt, and recently I sometimes hear this strange grinding noise when 4x4 is engaged, it almost sounds like clutch chatter but a lot quieter and more "metallic" sounding from the firewall area.
Instead of paying out a small fortune to throw parts at it or take it to a shop, I just want to swap to a more reliable manual t-case.
From what I've read, this is what I need to do the swap:
A 1354 or 1350 manual transfer case.
The front drive shaft from a 91 Explorer.
Supposedly all the parts are straight bolt on.
Anyone have any experience with this? Is it really this straightforward? Will I need a new front Diff, axle shafts, and hubs as well? Also, any tips on installing the new shifter in the truck cabin? I'm assuming its going to require some cutting into my truck's floor to install it.
Any tips would be really helpful, I'm hoping to do this really soon.