borlax
New Member
- Joined
- Apr 1, 2014
- Messages
- 34
- Reaction score
- 0
- Points
- 0
- Vehicle Year
- 1988
- Make / Model
- ford
- Transmission
- Manual
My license plate lights are powered through a splice in my tail lights, there is only one wire for both sockets and no ground. They are aftermarket and the style shown in the picture. I have Sylvania 1156 bulbs and can't get them to turn on. The sockets get about 11 volts with the key and lights on. The bulbs that were in it were both burnt out and were smaller on the glass part than the picture. I had a problem with the same style bulbs with 2 different scooters where the specs had to match exactly or they wouldn't work. My back up lamp sockets have no power, though I'm assuming that's the switch on the trans. All of the fuses are good. any ideas? Thanks
Attachments
-
2.8 KB Views: 187