suspenshion question

[gsxjay]

i just acquired a 2000 expo an well its far to low now i have access to several ranger parts trucks the question is what needs to be changed to make it sit as high as a standard height 4wd ranger besides a spring over i basically what is different in the front of the ranger as apposed to the expo

 

[adsm08]

An Explorer should be pretty close to the stock height of a Ranger. You might need new springs. The Explorer is a spring-under rear axle, but it's springs are longer.

 

[Jsommers]

You can crank the torsion bars up 2 inches if you think it sits too low.