• Welcome Visitor! Please take a few seconds and Register for our forum. Even if you don't want to post, you can still 'Like' and react to posts.

Steamy Goodness...


84bluebronco2

Well-Known Member
Joined
Dec 7, 2009
Messages
754
City
Central New York
Vehicle Year
94
Transmission
Manual
Pulled into the driveway today, and noticed the smell of antifreeze and saw steam coming out from the right side of the hood.... Shut the engine off and popped the hood and it looked like the steam was coming from the area around the heater core hoses... Does that plastic fitting have a tendency to split? :annoyed:

94 Explorer XLT 4.0/M5OD
 
I'm not sure if the design is the same on our trucks, but I had one break too. It's kinda where the hose T's off to go to the heater core?
 
Exactly where it is. I've gotta get a better look this afternoon, but unfortunately it seems to be one problem after another lately...
 
Ya mine leaked in the same spot. Its the heater control valve and its was pretty cheap at the parts store. Just remove the hose clamps and vacuum hose and repeat in the reverse order.
 
Last edited:
I've heard of those breaking too. At least it wasn't something worse, like the radiator!
 
Yea, that's what mine was. I was at a traffic light and steam started pouring out from under the hood. I turned the heater on full blast (always been told that's the thing to do if it's overheating) and it made it worse lol. It did give my engine bay a nice steam cleaning.
 
Mine steamed up bad too when it leaked since it sprays it right onto the exhaust.
 
Rep to nb11 and Loud Ranger! It ended up being the heater control valve. Do I have to have the switch on the dash in any specific position when installing the valve?

Where it broke:
IMG_20120126_113937.jpg


Post extraction leftovers:
IMG_20120126_115103-1.jpg
 
Last edited:
I just threw mine in i didnt pay any attention to where the heater was set to when i did it but it still works great. I just made sure to hook the hoses up to the right spots. Mine leaked by the metal ring where the 2 pieces meet.
 
Mine just blew last week. I still swear its leaking from somewhere. Yours looks exactly like mine when I got it out...also cheap and easy fix thank god.
 

Sponsored Ad


Sponsored Ad

TRS Events

Member & Vendor Upgrades

For a small yearly donation, you can support this forum and receive a 'Supporting Member' banner, or become a 'Supporting Vendor' and promote your products here. Click the banner to find out how.

Recently Featured

Want to see your truck here? Share your photos and details in the forum.

Ranger Adventure Video

TRS Merchandise

Follow TRS On Instagram

TRS Sponsors


Sponsored Ad


Sponsored Ad


Amazon Deals

Sponsored Ad

Back
Top