quick question bout heim joints...help!

[RebelAssaultTruk]

im in the middle of a d44 sas on my ex. i want to heim the ra ends, i need advice. was looking at jegs heim joints and want to know if they will work...

http://www.jegs.com/webapp/wcs/stor...archTerm=heim+joint&catalogId=10002&N=0&Nty=1

is this heim joint going to work? this is info on it. its got a 3/4 hole and 3/4 threads...
Heavy Duty Economy
Ball: 52100 Steel, Heat Treated, Hard Chrome Plated
Body: Carbon Steel, Zinc Plated, Rolled Threads
Static Pull: 3/4''Size - 18,810 Load Lbs.
heres the link: http://www.jegs.com/i/QA1/122/XML8-10/10002/-1

any help is greatly appreciated..will i be able to get a good heim from jegs based on their selection? if so which one would you guys recommend? im lost on this.

 

[out cast]

they will work. the zimmerman explorer is using 14000 lb heim joints and they have been fine for years. i'm positive you won't be breaking the 3/4" 19000 lbs heims...


AND GET PICS UP OF YOUR SWAP

 

[RebelAssaultTruk]

thanks man. im gonna order them then. is carbon steel alright though? i was thinking chromoly only...

 

[JohnnyU]

Those seem a bit chinsy. I would get the Extra High Strength Chrome Moly Ends: http://www.jegs.com/i/QA1/122/XMR12/10002/-1

Don't skimp, they're only $5 more....

 

[brendank]

I wouldn't even consider putting a tiny little rod end like that on the end of a radius arm. If you really want to though, at least get a good set, like these:

http://www.ballisticfabrication.com...-CrMo-rod-end-w-kevlar-liner-_p_125-1423.html

Those are 7/8", w/ 3/4" ball. Rated 55,692 lbs, way over double the one you posted.

I would highly suggest considering the 1" QA1 from Ballistic, though.