project daily/wheeler b3000

[Endoverend47]

just a manual tranny and t-case. no doubler yet, gotta finish the dash and cage, then put in the early bronco axles a friend is holding for me.

 

[CountryBoy78]

What gears are you running with the TTB?

I like the stance of your truck with the 6 inch lift with 33's.
Just getting ideas for my 94 Explorer, not sure if I want 33's yet with 3.73 gears and auto tranny.........I got bald 31's on it now with no lift.

 

[Endoverend47]

right now im running 3.73s. but i will be running 4.56s when i do my sas

 

[compaqeo]

Man that cage is cleanly done and that front bumper is awesome looking too

 

[badmts]

bumper fan club

dude your bumper needs a fan club and a publicist! I got a reply from your employers and i want it to look JUST LIKE YOURS! not close but a CLONE! can you guys put in winch and lights too? i got a black 94 b4000 lifted

 

[Endoverend47]

yes we can, i was going to do lights in mine but decided i liked how i set mine up. mine was built in my garage by me, not at stainless brain fab.

 

[badmts]

doppelganger

wait 'til you see my truck! we put the 15x10 baja's and 33-12.50-15 mudders on yesterday . it is a black 94 b4000 short bed std cab monday we are putting hella 5000 in the bumper until i can afford a cool winch bumper gears and locker coming from randys on thursday

 

[Endoverend47]

if its the one on craigslist selling the canopy, i saw it lol

 

[Endoverend47]

wait 'til you see my truck! we put the 15x10 baja's and 33-12.50-15 mudders on yesterday . it is a black 94 b4000 short bed std cab monday we are putting hella 5000 in the bumper until i can afford a cool winch bumper gears and locker coming from randys on thursday

i still need gears and a locker...but not for these axles...i have some early bronco ones that a friends holding for me...damn college student budget lol

 

[Endoverend47]

half doors anyone? well ive only made one so far

 

[mp3deviant721]

Your truck is one of my favorite B-Series on here. One question though, how did you mount your gauges in the place where the 4x4 controls would be? It looks like you cut out the vent and the 4x4 control mount part and replaced that with a piece of plastic. I'd really like to know how you did it, I really like how clean that looks.

 

[Endoverend47]

Your truck is one of my favorite B-Series on here. One question though, how did you mount your gauges in the place where the 4x4 controls would be? It looks like you cut out the vent and the 4x4 control mount part and replaced that with a piece of plastic. I'd really like to know how you did it, I really like how clean that looks.

my truck has a manual transfer case so there are no 4x4 controls there. and yes i cut the vent out because i dont use the panel vents anyway. just cut a peice of plastic to hold the gauges to replace the vent

 

[AaronC]

Nice truck. I am pleased to see you caged it before going overboard with the build. Question for you... How tall are you and how much head room do you have in the truck. I have a B series also, I am removing most of the sheet metal inside of the cab so I can tuck my cage tight in there.. I am still skeptical about head room..

 

[Endoverend47]

Nice truck. I am pleased to see you caged it before going overboard with the build. Question for you... How tall are you and how much head room do you have in the truck. I have a B series also, I am removing most of the sheet metal inside of the cab so I can tuck my cage tight in there.. I am still skeptical about head room..

im 5'11" or 6' depending on the day lol i have plenty of head room, i can whip my head around as much and as hard as i want and dont come near the bars...but i do have expoder leather seats swaped...though i dont think they are lower

 

[Endoverend47]

just ordere the last thing i need to finaly build my dash!!! should be here next week.