91 Big Red
Member
- Joined
- Nov 26, 2007
- Messages
- 12
- Vehicle Year
- 1991
- Transmission
- Manual
Hello i'm new i have a 91 ranger extended cab with 8 inch suspension 2 inch body lift. needs much work and i figureed i'd post my pics as my project comes along.i was driving it as an every day driver an it took alot of work to get it there, it sat in a field for 6 years before i got my hands on it and it was in very rough shape!
this is what it looked like the day after i got it. ball joints were bad, basically every bushing that could go bad in the fron end was bad. oh yea and the wheel bearings were bad (its not fun when 35/12.50 tires and wheels just fall off!)
had to custom make a Z bar for the steering because mine looked like an upside down y even with a drop pitman arm.
this is what it looks like right now, the 2.9 just couldn't hold up anymore bc of its previous owner's abuse so i am putting a low miles 4.0L in it.
more pics to come
this is what it looked like the day after i got it. ball joints were bad, basically every bushing that could go bad in the fron end was bad. oh yea and the wheel bearings were bad (its not fun when 35/12.50 tires and wheels just fall off!)

had to custom make a Z bar for the steering because mine looked like an upside down y even with a drop pitman arm.

this is what it looks like right now, the 2.9 just couldn't hold up anymore bc of its previous owner's abuse so i am putting a low miles 4.0L in it.

more pics to come
Last edited: