PlumCrazy's Build

[PlumCrazy]

Oooo. And the motor needs to moved up or the crossmember needs notched.

Sent from my XT907 using Tapatalk

 

[UrbanRedneckKid]

Oh, ok. Neat. So now you can safely rev over 6k!

Sent from my HTCONE using Tapatalk

 

[PlumCrazy]

And take some boost...

Sent from my XT907 using Tapatalk

 

[UrbanRedneckKid]

Sweet! I'll be lerking...

Sent from my HTCONE using Tapatalk

 

[PlumCrazy]

These guys showed up today...

Sent from my XT907 using Tapatalk

 

[PlumCrazy]

Bolted up the blower and upper plenum to the lower intake to check clearances for the temp sender I need to add for the temp gauge and e fan. There is way more room than I thought.lol



I did find out that the phenolic spacer is a must to get the BBK plenum to clear the fuel rail.

 

[PlumCrazy]

The shelf is beginning too seem a bit small....

Sent from my XT907 using Tapatalk

 

[PlumCrazy]

Sent from my XT907 using Tapatalk

 

[Downey]

nice

 

[PlumCrazy]

Apparently my phone was posting from my pocket... Lol.

Sent from my XT907 using Tapatalk

 

[merch]

I was begining to wonder

 

[Robert_1967]

You butt posted







Robert




posted with a bottle of Pier, and a ice cube.

 

[036speed]

I need to visit this thing.

After I get all my streetable vehicles running...

 

[PlumCrazy]

a few goodies showed up today...

-New Comp Cam 422
-upper and lower pan gaskets
-updated lower intake gasket set
-Valve cover gaskets
-bolts for mounting BBK plenum
-valve stem seals
-Water pump
-thermostat housing
-rear main seal
-cam bearings
-New Saginaw pump

I also had what was supposed to be a freeze plug set, but it wasnt right, so it went back.

 

[PlumCrazy]

Forgot to share this... hauled some more junk home from the old shop this past weekend...its like a truck, but gets 30+mpg

I loaded more on top too, but the bulk of the load was transmissions, diffs, drill press, axles, etc.lol