INFO Photos of Lifted RBV's With Different Lift & Tire Sizes

[hdmm]

Better pic of mine...

1997 Ranger XLT, 3.Slow, auto, 2wd, 4" RC suspension lift, 8.8 Trak Loc rear with 4.10 gears, 32x11.50R15 Kenda Klever MT's on 15x8 Soft Eight wheels.

 

[MetalDeerSolid]

1994 Ranger 2wd long bed, 2" coil spacer and 2" add-a-leaf (somehow got 1.75" lift in the front and 3" in the rear though), 2.5" Rancho RS5000 lift shocks, 31x10.50x15 BFG All Terrains.

I like the raked look, looks aggressive and suits a 2wd. I'm gonna keep it this way for a while, but eventually I want to get the Autofab 4" front lift and I'll probably put my Belltech 6400's in the rear when I do that. Then 33's!

Speaking of the Belltech shackles, here's an interesting pic!

4.5" lift in the rear with 31's, stock height in the front with 205/75r14 donuts. The rear was sitting 9" higher than the front hahaha. Took out the 6400's because that was way more than my shocks could handle.

 

[jeepinthe88]

94 4.0 4x4 with a 3 inch body lift and 35x12.5x15 pro comp mt's. Only rubs at full lock on the sway bar and radius arm because of the stock wheels. Doesn't rub under flex either with no fender trimming.

 

[WoodyB2]

3" BL with a 3" james duff with 35x12.50...minor fender trimming

 

[doker]

02 3.0 v6 , 3"lift spindle with 1"coil spacers ,3" blocks in the rear ,bfgoodrich 33" 12.50 15 , 15"procomp rims

 

[RangahDanga]

99 4x4 4.slow flareside 1.5" torsion bar crank. 285/75/16 (33's) Kenda Klever MT's. Only rubs at full turn

 

[OSJ]

heres my 97 mazda with a 4.0L 5spd. has 6" susp lift, 3" body lift and 37x13.5 pro comps. just put a allum 1 pc rear driveshaft in tonight.

 

[6.2]

06 fx4 level II

3" body lift, torsion crank to level.

33" hankook mt on 15x8 pro comp steelies

 

[Dofter]

Update on my Ranger

I haven't done much, but it looks a lot better. I have only 1.5" spacer up front with fiber fenders, no lift in the rear with stretched bedsides, 31x10.50r15 Hankook Dynapro ATs.

 

[DERANGEDRANGER]

pretty sure it has a 4inch rogh country lift on the front and factory 2inch block wih rough country 2.5inch block and add a leaf on 31x10.50s i know not good to stack em but just got it and workin the kinks out now

 

[Kowboy]

Nice!!! Love the color, Don't believe I've seen that color on a Ranger before. Sits real sweet too.

 

[Polar]

crown suspension 2 inch lift coils, 2 inch adjustable shackles in the rear, set for highest setting. 30 inch destination at's
2000 2wd Sport

 

[TremblantRanger]

Any pics of yout truck with this setup Polar? I'm considering this for my '98... Also, did you use longer travel shocks with that?

 

[036speed]

1999 Mountaineer with 33x12.50s on 4" BS wheels. ZERO lift. Cant turn but looks good. To run these, the bumper would need heavy trimming, the steps were removed and the back of the front fenders would need trimming. The back didnt have any issues. Just trew them on for fun.

 

[BLOODBANE]

Just put these on....

36x13.5x15 IROCs on American Racing r15x10 rims. 84 Ranger with 4" suspension,2" BL. cut rear fenders, fiberglass 3" cut out/3" flared front fender.