rangers92
Well-Known Member
- Joined
- Sep 20, 2011
- Messages
- 82
- Age
- 32
- City
- mobile home
- Vehicle Year
- 1998
- Transmission
- Manual
- My credo
- no F**ks to give
Ok so yesterday I was being dumb and bottomed out directly on my crossmember for my tranny. it had moved the postion oof one bolt maybe 1/8th and inch. And had a really small bend on a edge wich both were insignificant. Here's my problem I now have a small leak maybe 15 drips a day. Did I **** up my rear main seal by moving my tranny ever so slightly. Or is my oilpan gasket just worn. Its a lil bit on the tranny and most is on the oil pan. Its not leaking bad at all and has no sideeffects while drivng. Input would help along as cost of repairs. I have a 03 2wd 3.0 auto five speed.