Official "What Transmission is this " thread

[Ranger850]

What transmission is this?

 

[Snoranger]

E4OD

 

[RonD]

+1 ^^^

The E9TP-xxxx is the tail shaft part number, used on E4OD or 4R100

The F0TP-xxxx is the transmission part number, E4OD

 

[Ranger850]

E4OD

+1 ^^^

The E9TP-xxxx is the tail shaft part number, used on E4OD or 4R100

The F0TP-xxxx is the transmission part number, E4OD

It's a heavy son of a gun, that's for sure . It likes to stand with its tail shaft up in the air

 

[Ranger850]

@Sloaner4 you can have this one if you it will work. Come and get it (Tallahassee)

 

[rusty ol ranger]

C6 w/OD

AKA-E4OD

 

[Sloaner4]

@Sloaner4 you can have this one if you it will work. Come and get it (Tallahassee)

 

[bcschief]

Looks like it's for a 460/ 7.5-liter big block based on the bell housing.

 

[Ranger850]

Looks like it's for a 460/ 7.5-liter big block based on the bell housing.

I have NO IDEA whatsoever.

 

[Sloaner4]

I am very grateful for your generosity it really means a lot to me. I have tried to find what transmissions came standard on the 1995 Ford F-150 4X4 with the Windsor engine and I went to a website that listed all the transmissions that are compatible but, things started taking me down a confusing road. The talk became about different bolt up patterns on some of the transmissions and that was where I got lost. The way I understood it is that the different transmissions would work but, I may have to take the transmission from one bell housing and put it in the bell housing that has the same bolt pattern where my old transmission came out of my F-150 and I was praying that something in this universe would turn my bad luck around. I was crossing my fingers and and praying that I would get a response from someone that said: I have the exact transmission that you are looking for all you have to do is just align the clutch and pilot bearing with the shaft slide it in and align the pins then put the bolts back in their places and you are ready to go. I will go back and read your original reply and see if that transmission will work even if I have to change the bell housing and if I can arrange to get to Tallahassee I would be willing to give you some money just for your generosity. With all honesty THANK YOU SO MUCH for just replying and trying to help me. Sincerely Sloan4

 

[Ranger850]

I am very grateful for your generosity it really means a lot to me. I have tried to find what transmissions came standard on the 1995 Ford F-150 4X4 with the Windsor engine and I went to a website that listed all the transmissions that are compatible but, things started taking me down a confusing road. The talk became about different bolt up patterns on some of the transmissions and that was where I got lost. The way I understood it is that the different transmissions would work but, I may have to take the transmission from one bell housing and put it in the bell housing that has the same bolt pattern where my old transmission came out of my F-150 and I was praying that something in this universe would turn my bad luck around. I was crossing my fingers and and praying that I would get a response from someone that said: I have the exact transmission that you are looking for all you have to do is just align the clutch and pilot bearing with the shaft slide it in and align the pins then put the bolts back in their places and you are ready to go. I will go back and read your original reply and see if that transmission will work even if I have to change the bell housing and if I can arrange to get to Tallahassee I would be willing to give you some money just for your generosity. With all honesty THANK YOU SO MUCH for just replying and trying to help me. Sincerely Sloan4

Your money is useless. You would be doing me a fovor hauling it off for me. Let me know what you find out and IF you want this or not.

GOOD LUCK!!!!