Welcome Visitor! Please take a few seconds and 
- Joined
- Oct 18, 2007
- Messages
- 979
- Vehicle Year
- 1986
- Transmission
- Automatic
Hey guys, I just finished buttoning up wireing on for the EFI (well I think I did, we'll see if it works.....) and now I'm putting the upper intake manifold/plenum on and I dont remember where all the lines hook up. I have the vacuum lines figured, they wern't hard, but I dont know where the following things go:
The upper coolant line, right after the throttle body,
the line coming out the front from under the center of the intake body (right hand side)
the line that looks like a ? mark on the back
and the line farthest to the left under the intake body.
anybody that has this successfully installed, please please please share some pics and/or details of where the lines run.
thanks guys
The upper coolant line, right after the throttle body,
the line coming out the front from under the center of the intake body (right hand side)
the line that looks like a ? mark on the back
and the line farthest to the left under the intake body.
anybody that has this successfully installed, please please please share some pics and/or details of where the lines run.
thanks guys
