Need help with a issue

[DBright1]

I have a question my 2001 Ford Ranger 3.0 cranks then dies it runs idled high then dies and runs very rough ...I replaced the Fuel Pump and Filter ,EGR valve and EGR sensor ,Cam Shaft Position Sensor and Synchronizer ,Crank Sensor ,and Coil Pack trying to track down the problem but its still doing the same thing it runs for about a minute then shuts off ...Can someone please help me "Thank You

 

[rusty ol ranger]

Will it stay running if you hold your foot on the throttle?

 

[DBright1]

Will it stay running if you hold your foot on the throttle?

No it shuts off when I press the throttle and try to keep it running

 

[rusty ol ranger]

No it shuts off when I press the throttle and try to keep it running

Have you pulled codes?

 

[DBright1]

Im beginning to think its a wiring issue ...when it started I was on the interstate and the oil pressure gauge started jumping like crazy and soon as I hit 70 the engine would slowly start slowing up and start running rough then it shuts down you cant give it gas to keep it running

 

[DBright1]

Have you pulled codes?

no I can check the codes today and give them to you

 

[rusty ol ranger]

no I can check the codes today and give them to you

Pull the codes see what comes up. We'll go from there.

 

[Curious Hound]

Pull codes like they said. But also, check battery voltage key off and engine running.