Thomas kittredge
Member
Has anyone tried putting 2005-2009 17”or 18” 5 spoke mustang wheels on there 92 or earlier ranger. I’m getting anywhere between 35-50 mm offsets.
-
Welcome Visitor! Please take a few seconds and Register
for our forum. Even if you don't want to post, you can still 'Like' and react to posts.
Mustang wheels
- Thread starter Thomas kittredge
- Start date
50mm is about 2 inches.
you will need almost 2" spacers the keep the wheels where they are
without spacers they will go in, way in.
you will need almost 2" spacers the keep the wheels where they are
without spacers they will go in, way in.
Thomas kittredge
Member
I figured they might be too deep. I bought the truck off my son. And right now I have these wheels on it. When it had stock springs on the front, they were rubbing on the front edge of the inside of the wheel well. So we put in the 1 inch lift springs. I want to take it back down to stock ride height and have the wheels clear. This company has not offer this wheel with the backspace that’ll work so I’m looking at finding some different wheels. The rear tire seemed to clear OK it’s just the fronts that rub.
Attachments
Similar threads
Sponsored Ad
Sponsored Ad
TRS Events
Member & Vendor Upgrades
For a small yearly donation, you can support this forum and receive a 'Supporting Member' banner, or become a 'Supporting Vendor' and promote your products here. Click the banner to find out how.
Recently Featured
Ranger Adventure Video
TRS Merchandise
Follow TRS On Instagram
