m5od transmission hyd line

[rochhound]

i bought a m50d 5 speed trans im replacing my al4d for manual i cant figure how to disconnect the hyd slave line at trans ive taken the white plastic sleeve of but cant get it to release. i dont like to force things and possibly break it
any help would be appreciated
thanks

 

[RangerSVT]

Obtain you a clutch release tool at your local autoparts store, they are very inexpensive and valuable. Once you have the sleeve depressed completely on all 360*, then it will release....

SVT

 

[adsm08]

Why did you take the sleeve off? That will make this a bit harder.

Frankly, at this point I'd cut the line and punch the roll pin out. The line isn't that expensive, not at all hard to find, you will need a new slave either way, and it will just save you a bunch of headache.

 

[AllanD]

The white plastic sleeve is the release collar if you've removed it put it back in, you push that sleeve IN, not "take it off"

AD

 

[adsm08]

The white plastic sleeve is the release collar if you've removed it put it back in, you push that sleeve IN, not "take it off"

AD

And yet I've seen a rash of this style post recently.

Read the freaking instructions people.