• Welcome Visitor! Please take a few seconds and Register for our forum. Even if you don't want to post, you can still 'Like' and react to posts.

Lets see your bumpers


Painted an mounted. Its nothing too aggressive but it is designed to be used. Its tow points go directly to the frame and the center section is designed to hold a winch
19331_473253685600_659930600_11111883_579542_n.jpg

i really really like it. its not big and gaudy, yet is tough and functional. pics of the winch mount set up?
 
Quote:
Originally Posted by BBoleac View Post
Painted an mounted. Its nothing too aggressive but it is designed to be used. Its tow points go directly to the frame and the center section is designed to hold a winch
19331_473253685600_659930600_11111883_579542_n.jpg
i really really like it. its not big and gaudy, yet is tough and functional. pics of the winch mount set up?

thanks, thats exactly what i was trying for. As for the winch mount, its just a plate that will sit in between the frame rails. The plate will sit on the bottom lip of the frame rail to keep the winch in the bumper and protected by the center section. The tubing part of the bumper itself won't actually have any force on it when pulling or being pulled. all the tow points and winch mounts go directly to the frame
 
only got a custom rear bumper right now.. still using the stock front one until i build a nice beefy one..

rear bumper is made out of 4"x4" square stock steel.. it was originally built and bolted on my '88 S15, but then i decided to take it off and put it on the ranger.. had to build some new mounting brackets for it as the frame rails of a ranger is narrower than a s15.
rangerbumper006.jpg

rangerbumper008.jpg
 
so simple yet it looks really nice props
 
heres a couple of pics of mine, both use 3/8" structural channel and are mounted to the frame with 4 1/2" grade 8 bolts and nuts.
DSCI0083.jpg

DSCI0229.jpg

8402060021_medium.jpg

carpics011.jpg

DSCI0339.jpg

DSCI0348.jpg
 
Hitech_hick, I like your bumper. I need that on my 04.
 
Last edited:
Scotty J. where did you get your front bumper at, that would work perfect on my '04 cause I've already removed the valance.
 
its my first, but its strong. wsed an old warn transformer winch bush guard...now i want somthing low profile. but not too good at designing things so!!
0305001647.jpg
 
index.cfm
just a push bar and skid plate that i through together. nothin special but i like it.
 
sorry pic didnt work
 
heres mine hope you like it.

Picture044.jpg


Picture054.jpg
 

Sponsored Ad


Sponsored Ad

Special Events

Events TRS Was At This Year

TRS Events

Member & Vendor Upgrades

For a small yearly donation, you can support this forum and receive a 'Supporting Member' banner, or become a 'Supporting Vendor' and promote your products here. Click the banner to find out how.

Latest posts

Recently Featured

Want to see your truck here? Share your photos and details in the forum.

TRS Latest Video

TRS Merchandise

Follow TRS On Instagram

TRS Sponsors


Sponsored Ad


Sponsored Ad


Amazon Deals

Sponsored Ad

Back
Top