Welcome Visitor! Please take a few seconds and 
cp2295
Well-Known Member
- Joined
- Jul 25, 2013
- Messages
- 1,027
- City
- Washougal, wa
- Vehicle Year
- 1999
- Transmission
- Manual
- My credo
- If you ain't first you're last
Its pretty ghetto but it works, at least for now
So I took the back end of an explorer parking brake, cut off my rangers, and just used cable clamps to tie them together.
then I used the explorers mount and cut it in half, and drilled a hole on the other side, then spaced it out with nuts until the passenger side worked. I cut a notch in the bracket I made in order for the cable to slip through, then I pushed the cable through until the clips popped through. Btw I just bolted to the rangers mount on the leaf spring
Sent from my DROID RAZR using Tapatalk
So I took the back end of an explorer parking brake, cut off my rangers, and just used cable clamps to tie them together.
then I used the explorers mount and cut it in half, and drilled a hole on the other side, then spaced it out with nuts until the passenger side worked. I cut a notch in the bracket I made in order for the cable to slip through, then I pushed the cable through until the clips popped through. Btw I just bolted to the rangers mount on the leaf spring
Sent from my DROID RAZR using Tapatalk
