HID Options?

[85b]

So 5k 55 if i just want pure white. I did all led's in my b2. Only thing I had a problem with was turn signals. I had to put in a clay load resistor in my tailights for them to work normal again. I just gotta get behind my dash and put leds in, only thing missing them ha. I put in a 5" tach on the left side of my instrument panel, where oil press. volts, gas gauge and temp would go. 2 of the gauges didnt work anyway and now the things way bright. Need to brighten up my speedo

 

[irishblessing]

Use this chart for color its pretty accurate 5k is white depending on 35w to 55w, use the bulb color/ type tab. 6k is where the color starts changing it has a slightly blue tint.
http://www.ddmtuning.com/Products/DDM-HID-Kit-Slim-Ballast-35W-or-55W

 

[Lil-Pony]

4300 look oem
5000 looks european
6000 looks modern
7000+ ricer

 

[Lil-Pony]

So 5k 55 if i just want pure white. I did all led's in my b2. Only thing I had a problem with was turn signals. I had to put in a clay load resistor in my tailights for them to work normal again. I just gotta get behind my dash and put leds in, only thing missing them ha. I put in a 5" tach on the left side of my instrument panel, where oil press. volts, gas gauge and temp would go. 2 of the gauges didnt work anyway and now the things way bright. Need to brighten up my speedo

You can remover the resistor with a set of electronic relays http://bit.ly/1c2iNTq
Yes 5k either 35 or 55. Its just 55 will be brighter and whiter. Also did you do those reverse hids, if so what brand....

 

[85b]

It was just a another another h4 kit I bought off a friend after he got new ones. So it was just an ebay brand. I'm having a problem with melting the black tailight housing itself, but i use them as a spotlight to hook on and tow out people and always leave them on because i forget. I just used epoxy and silicone to get them in honestly. But I love them

 

[MorganMcCann]

What did you pay for the setup on the B2?

 

[85b]

Housings - $30
HID kit - $45 x2, gonna swap out the fronts here soon for bixenon 55w
DRL leds- $20

thats just the headlight portion, well and reverse lights

 

[MorganMcCann]

How different are your housings compared to a ranger housing?

 

[Lil-Pony]

How different are your housings compared to a ranger housing?

Oem is a sealed halogen. These allow for an h4 i beleive to be screwed, locked, etc in to the housing.

 

[MorganMcCann]

H4 as in that secondary bulb that was mentioned in the previous posts? Kind of like daytime lights?

 

[85b]

No, for the housings the H4 is the primary hi/low bulb. All 7x6 housings besides the sealed beams take an H4, or most that I've seen. In my headlights, it also takes a 194. Ill try to get some pictures in the daylight tommorow.